Originally Posted by GoneSouth
You can buy the Dexter blade (or any blade), cut off the plastic handle. then take a sawzall blade and use it as a template. Mark off where to trim the new blade and use a dremel tool, or burring tool to shape it the same as the sawzall blade to fit the holder. Drill the hole and test fit. Adjust as necessary. The Dexter is stainless steel and you will need to go slow. It is a hard material. Slower RPM works better on Stainless Steel.
I do this with the 9" Mr. Twister blades. I modify the blade with a dremel. I've not had any problems yet and had my setup for several years now.
Sent from my iPhone using Tapatalk