Courtney Vaughan
01-23-2008, 11:41 AM
Ok, Novak has some new information on their brushless conversions:
http://www.teamnovak.com/products/brushless/conversion_kits/index.html
says they're specifically for the Novak HV motors.....which if you factor in the 5mm rotor upgrade, are not that expensive at all! Inching me a little closer to taking the plunge on my Hyper 8!!!
My only concern is that the HV systems are pretty much for monster trucks, and from my research looks like they top out around 35MPH....is that because the wheels are so large diameter?
Do I have to use the HV ESC on there as well?
Can any of you guys run some calculations through those programs for a Hyper 8 PRO with the HV6.5 motor running on (2) 2S packs wired in series (14.8V)?
http://www.teamnovak.com/products/brushless/conversion_kits/index.html
says they're specifically for the Novak HV motors.....which if you factor in the 5mm rotor upgrade, are not that expensive at all! Inching me a little closer to taking the plunge on my Hyper 8!!!
My only concern is that the HV systems are pretty much for monster trucks, and from my research looks like they top out around 35MPH....is that because the wheels are so large diameter?
Do I have to use the HV ESC on there as well?
Can any of you guys run some calculations through those programs for a Hyper 8 PRO with the HV6.5 motor running on (2) 2S packs wired in series (14.8V)?