View Full Version : Curado was under Water
bayoudj
06-26-2007, 03:42 PM
A friend gave me his Curado that was under water for several months. He had lost it overboard in a favorite fishing spot of ours. I found it a few months later on the end of my line while fishing. It is covered with small barnacles and full of mud. Any hope for restoring it?
choupique
06-26-2007, 03:43 PM
Nope!!!! By the time you replace all the parts you could buy a new one... Just my.02
flounderpounder10
06-26-2007, 03:52 PM
check with mikeinfriendswood
Bantam1
06-26-2007, 03:59 PM
At this point it would cost more to fix it then to replace it.
bayoudj
06-26-2007, 04:09 PM
Well, it looks ok on the wall of the fishing camp, and has a story to tell, so I guess it will stay put. Thanks for the help.
fishgravy
06-26-2007, 04:09 PM
Coffee table conversation piece.
REDKILR
06-26-2007, 04:11 PM
As long as the pinion gear and the other drive gears aren't all stuck together,you could probably fix it for around $70-80 bucks maybe a little more.
troy merrill
06-26-2007, 04:13 PM
Coffee table conversation piece.
Yep. I wouldn't even bother. The trouble and bad level of service it would give you would outweigh any good by a long way.
Aggieangler
06-26-2007, 04:40 PM
If it is a B series curado (green one), you could pick one up on ebay for about what the parts would be (if they fell within the 80-90 dollar range). I would stick with it as a decoration piece!
trout250
06-27-2007, 12:16 AM
Most of that stuff will clean off pretty easy, bearings most costly things to replace, rest should clean up. Finish make get scarred up , but try soaking in a vingar/water solution to make the barnacles turn loose
FishEyes
06-27-2007, 07:12 AM
One of my daily use reels is a curado snagged off of a camp pier E. Matty. Took it apart and soaked it in vinegar for about 4 days and all the growths came off. I had to buy a new handle and 3 bearings at about 7-8 bucks apiece.
redman71
07-02-2007, 03:39 PM
Give it a try at cleaning it up. I snagged one off the bottom of a freshwater lake a couple of years ago. It took me about 4 tries to get it clean enough to use, but now it works fine. It may be a different story with the saltwater, but what the heck give it a go.
Gorda Fisher
07-02-2007, 06:36 PM
One of my daily use reels is a curado snagged off of a camp pier E. Matty. Took it apart and soaked it in vinegar for about 4 days and all the growths came off. I had to buy a new handle and 3 bearings at about 7-8 bucks apiece.
It didnt happen to be on an all star shrimp tail special did it?
Poncho
07-02-2007, 10:13 PM
Check out this guy. Click on the unbelieveable repair button on the left of his page. http://www.rodnreels.com
Poncho
07-02-2007, 10:15 PM
Corrected link http://www.rodanreels.com.
steverino
07-02-2007, 10:31 PM
If it wasn't physically damaged and the aluminum parts are not badly pitted/corroded it can be cleaned/rebuilt. I have rebuilt several reels that my son snagged near Seawolf Park. One was a Calcutta that I use occassionally. The Curado he found was "crushed" with damaged sideplates. If the aluminum parts are heavily pitted such that there are holes or missing metal then forget it. I collect old Ambassadeur reels and I just got use to taking them apart, cleaning them and repairing them. It is kind of a challenge-like fixing a discarded or broken item and getting it to work. If nothing else it is good for spare parts.
FishEyes
07-03-2007, 07:24 AM
It didnt happen to be on an all star shrimp tail special did it?
Errr...........maybe. Heh......I don't really know, one of my students gave it to me and told me the story of its recovery.
vBulletin® v3.8.4, Copyright ©2000-2009, Jelsoft Enterprises Ltd.